71 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com standard density connector savers / gender changers ad and had series connectors are suitable for use in any applications requiring high performance characteristic. the normal density ad and had series are available in five standard connector variants of 9, 15, 25, 37 and 50 contacts. ad and had series connectors utilize precision machined contacts for strength and durability. ad series female contact features a rugged open entry design. had series female contact features the posiband closed entry design for even higher reliability, see page 1 for details. ad and had series connectors can be mated to a connector which would normally experience high num- bers of mating cycles. the ad/had connector can be easily replaced, ?aving a connector which is not eas- ily replaced. these connectors can also be used as a ?ender changer? connectors are available in high density versions, see page 75. technical characteristics materials and finishes: insulator: ad series: nylon resin, ul 94v-0, black color. had series: glass-filled dap per astm-d-5948, ul 94v-0. contacts: precision machined copper alloy. contact plating: gold flash over nickel plate. other finish- es available upon request. shells: steel or brass with tin plate; zinc plate with chromate seal, stainless steel pas- sivated. other materials and finishes available upon request. non-magnetic versions are available, contact technical sales. mechanical characteristics: fixed contacts: size 20 contacts, male - 0.040 inch [1.02 mm] mating diameter. ad series female contact offers open entry design. had series female contact features poisband closed entry design, see page 1 for details. connector saver: male to female or male to male. contact retention: 9 lbs. [40 n]. shells: male shells may be dimpled for emi/esd ground paths. polarization: trapezoidally shaped shells. mechanical operations: ad series: 500 operations, minimum, per iec 60512-5. had series: 1,000 operations, minimum, per iec 60512-5. electrical characteristics: contact current rating: 7.5 amperes, nominal for open en 10 amperes for closed entry. tested per u.l. 1977, six contacts energized. see temperature rise curve on page 2 for details. initial contact resistance: 0.008 ohms, maximum for ad series. 0.005 ohms, maximum for had series. proof voltage: 1,000 v r.m.s. insulator resistance: 5 g ohms. clearance and creepage distance: 0.039 inch [1.0 mm], minimum. working voltage: 300 v r.m.s. climatic characteristics: temperature range: -55?c to +125?c. ad series size 20 ?pen entry contact design had series size 20 posiband ?losed entry contact design connector saver p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant for rohs options see page 74.
72 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com standard density connector savers / gender changers male to female connector saver size 20 contacts a c e k1 k b d male contacts molding spacer female contacts 0.290[7.37] 0.018[0.46] ?.008 0.036[0.91] 0.020[0.51] maximum rollover b1 d1 ?.005 0.120 [3.05] thru hole,2 places typical part number: ad9f0x9m0x ad and had series size 20 cont a ct connect or sa ver contact variants face view of male or use mirror image for female 22 21 20 3 12 24 23 26 27 25 30 28 29 32 33 31 6 5 4 8 7 12 11 10 9 14 13 36 34 35 37 17 16 15 19 18 38 35 34 37 36 39 40 43 41 42 5 18 20 21 19 2 1 4 3 24 23 22 27 26 25 7 610 9 8 45 46 44 49 47 48 50 33 30 28 29 32 31 13 12 11 16 15 14 17 9 8 7 6 1 5 4 23 15 14 12 11 10 9 13 3 2 1 8 7 6 5 4 14 1 2 25 24 23 22 21 20 18 17 19 16 15 8 7 6 5 4 3 13 12 10 9 11 size 9 size 15 size 25 size 37 size 50 connector variant sizes a 0.015 [0.38] b 0.005 [0.13] b1 0.005 [0.13] c 0.005 [0.13] d 0.005 [0.13] d1 0.005 [0.13] e 0.015 [0.38] k1 0.005 [0.13] k 0.005 [0.13] 9 m 1.213 [30.81] 0.666 [16.92] 0.984 [24.99] 0.329 [8.36] 0.494 [12.55] 0.233 [5.92] 9 f 1.213 [30.81] 0.643 [16.33] 0.984 [24.99] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 15 m 1.541 [39.14] 0.994 [25.25] 1.312 [33.32] 0.329 [8.36] 0.494 [12.55] 0.233 [5.92] 15 f 1.541 [39.14] 0.971 [24.66] 1.312 [33.32] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 25 m 2.088 [53.04] 1.534 [38.96] 1.852 [47.04] 0.329 [8.36] 0.494 [12.55] 0.230 [5.84] 25 f 2.088 [53.04] 1.511 [38.38] 1.852 [47.04] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 37 m 2.729 [69.32] 2.182 [55.42] 2.500 [63.50] 0.329 [8.36] 0.494 [12.55] 0.230 [5.84] 37 f 2.729 [69.32] 2.159 [54.84] 2.500 [63.50] 0.311 [7.90] 0.494 [12.55] 0.243 [6.17] 50 m 2.635 [66.93] 2.079 [52.81] 2.406 [61.11] 0.441 [11.20] 0.605 [15.37] 0.230 [5.84] 50 f 2.635 [66.93] 2.064 [52.43] 2.406 [61.11] 0.423 [10.74] 0.605 [15.37] 0.243 [6.17]
73 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com standard density connector savers / gender changers 4-40unc-2b 4-40unc-2a 4-40unc-2b 4-40unc-2b 4-40unc-2a 4-40unc-2a 4-40unc-2b 4-40unc-2b 4-40unc-2b 4-40unc-2b 4-40unc-2a 4-40unc-2a 4-40unc-2a 4-40unc-2a 4-40unc-2a 4-40unc-2b 0.754 [19.15] 0.754 [19.15] 0.754 [19.15] 0.754 [19.15] female contacts male contacts female contacts male contacts female contacts male contacts female contacts male contacts jackscrew systems code e, e6, t and t6 e6 tt6 e rotating male and female jackscrews rotating male and female polarized jackscrews fixed male and female polarized jackscrews fixed male and female jackscrews material: brass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. connectors designed to customer specifications positronic d-subminiature connectors can be modified to customers specifications. examples: select loading of contacts for cost savings or to gain creepage and clearance distances; longer pcb terminations; customer specified hardware; sealing for water resistance. contact technical sales with your particular requirements. example part number: ad9fex9m0x example part number: ad9fe6x9m0x example part number: ad9ftx9m0x example part number: ad9ft6x9m0x
74 dimensions are in inches [millimeters]. all dimensions are subject to change. connector savers d - s ub positronic industries connectpositronic.com standard density connector savers / gender changers ordering information - code numbering system specify complete connector by selecting an option from step 1 through 9 step 3 - 1 st connector gender m - male f - female 1 2 3 4 5 6 7 8 9 10 ad 9 f s x 9 m s x /aa 11 -14 step 11 - special options -14 - 0.000030 [0.76? gold over nickel. -15 - 0.000050 [1.27? gold over nickel. contact technical sales for special options * 1 step 8 - 2 nd connector mating style 0 - swaged spacer 0.120 [3.05? mounting hole s - swaged spacer 4-40 unc-2b threads * 3 e - rotating male and female jackscrews (select 0 in step 4) * 3 e6 - rotating male and female polarized jackscrew (select 0 in step 4) * 3 t - fixed male and female jackscrews (select 0 in step 4) * 3 t6 - fixed male and female polarized jackscrew (select 0 in step 4) * 2 step 6 - 2 nd connector variant 9, 15, 25, 37, 50 step 5 - 1 st connector shell option 0 - zinc plated, with chromate seal. * 4 s - stainless steel, passivated. x - tin plated. z - tin plated and dimpled (male connectors only). * 1 step 4 - 1 st connector mating style 0 - swaged spacer 0.120 [3.05? mounting hole s - swaged spacer 4-40 unc-2b threads * 3 e - rotating male and female jackscrews (select 0 in step 8) * 3 e6 - rotating male and female polarized jackscrew (select 0 in step 8) * 3 t - fixed male and female jackscrews (select 0 in step 8) * 3 t6 - fixed male and female polarized jackscrew (select 0 in step 8) step 2 - connector variant 9, 15, 25, 37, 50 step example step 10 - environmental compliance options /aa - compliant per eu directive 2002/95/ec (rohs) p o s i t r o n i c i n d u s t r i e s ? p e r e u d i r e c t i v e 2 0 0 2 / 9 5 / e c ? rohs r o h s compliant step 9 - 2 nd connector shell option 0 - zinc plated, with chromate seal. * 4 s - stainless steel, passivated. x - tin plated. z - tin plated and dimpled (male connectors only). step 7 - 2 nd connector gender m - male note: once you have made a connector selection, contact technical sales if you would like to receive a drawing in dxf, pdf format or a 3-dimensional iges, step, or solidworks file. sk drawing 3-dimensional model note: if compliance to environmental legislation is not required, this step will not be used. example: ad9fsx9msx * 1 connector mating style for both connectors must be the same if 0 or s is used. if e or e6 is used in either step 4 or 8 the other step must be 0. * 2 connector variant for both connectors must be the same. * 3 for hardware information, see page 73. * 4 for stainless steel dimpled male versions contact technical sales. step 1 - basic series ad series - open entry female contacts, nylon insulator had series - posiband closed entry female contacts, dap insulator. military plating options available.
|
